News
Plastic Shrinkage During Processing: Solutions from Additives
Plastic shrinkage during processing is a common issue in injection molding, extrusion, or thermal forming. When plastic changes from a molten to a solid state, the volume decreases, leading to warpage and deformation. This affects...
Read moreWhat Are Anti-Fouling Materials? Applications in Manufacturing and Maritime
In modern industries, product surfaces often face dust, grease, algae, and microorganisms. These factors accelerate wear, complicate cleaning, and increase maintenance costs. To address this, scientists developed anti-fouling materials. WHAT ARE ANTI-FOULING MATERIALS? This group...
Read morePeeling Paint on Plastic: What Causes It?
In various industries, painting on plastic surfaces is widely applied. Coatings not only enhance appearance but also protect the base material. However, a common issue is paint peeling after a short time of use. Plastic...
Read moreVirgin PET vs. Recycled PET – Detailed Comparison
PET plastic is a familiar material, found in packaging, water bottles, textiles, and many consumer goods. However, it does not exist in a single form but is divided into two types: virgin PET and recycled...
Read moreFlame Retardants – Applications in Plastics and Textiles
Fire hazards remain one of the most serious risks in daily life and industry. Materials such as plastics and textiles are especially vulnerable because of their flammability. To address this issue, the chemical industry has...
Read moreWhat is a Bio-based Solvent? Applications in Industrial Production
Solvents are indispensable materials in modern industrial production. From coatings and printing to cleaning and pharmaceuticals, solvents play a key role in almost every process. However, most conventional solvents derived from petrochemicals cause pollution, toxic...
Read moreUV Stabilizers – The Key to Longer-Lasting Outdoor Plastics
Outdoor plastics face harsh conditions every day under the sun. Constant exposure to ultraviolet (UV) rays causes yellowing, loss of gloss, and faster wear. Many products become weak and need to be replaced sooner than...
Read moreCommon defects in wood coating and how to fix them
Wood coating is an important step in finishing both interior and exterior products. A proper coating not only protects the material but also enhances its aesthetic value. However, if the application is not done correctly,...
Read moreWhat Are Swirl Marks on Paint? Causes and Solutions
What Are Swirl Marks on Paint? In coating and surface maintenance, swirl marks are a common phenomenon. They are a type of paint defect, appearing as small, curved, circular scratches. The most noticeable feature is...
Read moreHow to Prevent the Halo Effect in Coatings
The halo effect in coatings is one of the most common and frustrating defects. It appears as bright rings or uneven patches that make surfaces inconsistent. Fortunately, this problem can be avoided by following proper...
Read more
